At the present time, everyone who wishesChange your home, can realize your dreams with the use of modern materials. And there are such a variety that it is enough just to make the appropriate sketch and enlist the support of a specialist. But if you set yourself the goal of repair yourself, you should carefully study the choice of materials and familiarize yourself with their properties. Consider the profiles for gypsum board, the types of fasteners and what it is needed for.
Recently, you can see that almost allThe interior design consists of plasterboard. This can be curved partitions, straight walls, multi-level ceilings, etc. But sheets of plasterboard can not be fixed without a holding base, which is the metal profile. Of course, some builders try to replace it with a wooden beam, but this option is short-lived: the tree is capable of bending, deforming, changing its size with changes in humidity. It is rotted and destroyed by insects. All metal types of profiles under gypsum board do not swell, do not change in size and, thanks to zinc coating, do not lend themselves to corrosion. In addition, cuts can be made on the profile shelves, after which it will become curved at the required angle, which will allow the installation of the most unusual shapes.
There are a variety of profiles forgypsum plasterboard, the types of which differ in their characteristics and purpose. It is worth considering the most popular metal foundations and find out what they are used for:
Also distinguish profiles for gypsum board, the types of which are marked with the symbols UW-50. They are used as guides for the CW-50.
When buying building materials isbe guided by the rule that profiles for gypsum plasterboard (whose types are very diverse) differ in their characteristics and purpose. Since the bearing capacity of structures depends on the thickness of the metal, the use of a 0.4 mm thick profile is not recommended. In view of unsatisfactory rigidity, it is used in works not related to the installation of gypsum boards. The profile of the economy variant is considered to be 0.45 mm thick. The base with such rigidity will be not only strong, but also affordable. Strengthened is a profile with a thickness of 0.55-0.6 mm. It is suitable for mounting structures of any type, but costs a little more.